For sport street riders looking for a waterproof jacket (with ventilation) that also want the aesthetic of speed wrapped into a CE-class AA jacket, we bring you the Control H2O.
Its own vibe
When we created the Control H2O jacket, we had a very distinct vision. It was to be the seamless blending of both motorsport (think hard parts at the shoulders) and sportswear (think lamination around the zippers and tonal graphic prints). And unlike in the past - where any item in a “family” of jackets/pants/one-pieces - echoed almost identical aesthetics, we did something new. The Control H2O jacket is not a direct copy of leather series (jacket and one-piece suit); however, we took the graphics story of the ergonomic gradient shapes built out of diamonds and applied it in its own unique way on the chest panels and upper arms. This way, it’s immediately recognizable as a member of the “Control” series, but with its own fashion-focused twist.
Every(rainy)day functionality
For the days when the rain is coming down, you’re covered. The Control H2O jacket comes with the hydratex|Mesh G-liner construction along with a detachable thermal liner (to keep the cold away when necessary). And when the sun is out and you need to breathe a bit more, take the liner out and open the exhaust vents on the lower sleeves and upper back.
Zippers on lower arms
Air outlet on upper back
Detachable thermal liner
Wind & water catcher behind front zipper
hydratex|Mesh G-liner
The 100% waterproof hydratex|G-liner coating is applied to the mesh inner lining of the garment. The seams are sealed for maximum waterproofness. This makes the wearing comfort optimal, while the functional properties of the G-liner construction are preserved.
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
SEESMART shoulder protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimetres or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Laminated reflective logo on back
This product has a reflective logo at the back of the garment to help riders who are on the road be seen in low light, inclement weather, and at night.
Regular fit
The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.
Short connection zipper
The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.
Jeans loop
The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.
Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.
V-flap at cuff
Softshell 3L
High density polyester 600D
This fabric takes polyester yarn and weaves it with a finer polyester yarn, to create a high woven density that increases protection and abrasion-resistance.
Polyester ripstop
Mesh
Outer shell made with recycled polyester
Outershell
Machine wash 30°C, mild cycle | |
Do not bleach | |
Do not tumble dry | |
Do not iron | |
Do not dry clean |
Refer to the user manual |
Remove protectors before cleaning |
Wash inside out |
Removable thermal liner
Machine wash 30°C, mild cycle | |
Do not bleach | |
Do not tumble dry | |
Do not iron | |
Do not dry clean |
Use mild detergent |
Live your passion. We’re here to make that happen regardless of what you ride. Follow us and get inspired by REV’IT! riders all around the world.