This jacket’s previous generations are the epitome of affordable, capable, all-weather touring gear. And when the going gets tough, the Voltiac 3 H2O stays true to its roots. Only now it’s upgraded with PWR|Ripstop fabric on the shoulder, elbow, and forearm areas, plus an outer shell construction in 600-denier polyester that’s form-fitting and more than tough enough to withstand the elements.
Switch seasons
You’ll never be caught out by the weather in the Voltiac 3 H2O. The hydratex|Sphere mesh G-liner is waterproof yet breathable. The thermal liner will keep you cosy during most seasons, while two ventilation zippers are sealed to avoid water ingress and open the full length of your chest to optimize airflow when required. Warm, cold, wind, rain, or shine, in the Voltiac you’ll adjust just fine.
Protection you can trust
We could talk about motorcycle jackets all day long – and we often do. But it’s the people wearing them who matter the most. When designing and developing an affordable jacket, there is no compromise, and you can expect the same level of protection and upgrade options as with our top-of-the-range REV’IT! jackets – SEESMART CE-Level 1 at the shoulders and elbows, plus an insert for an optional SEESOFT CE-Level 2 back protector.
Regular fit
The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.
Adjustment drawcord at hem
Adjustment strap at waist
Adjustment tab at cuffs
Adjustment tab at upper arm
Flexisnap at collar
The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.
Inner pocket within thermal liner
The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.
Slit pocket at chest
Two hand warmer pockets
Two stash pockets at front
Short connection zipper
Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.
Two-way Collar Snap Closure System
V-flap at cuff
hydratex|Mesh G-liner
The 100% waterproof hydratex|G-liner coating is applied to the mesh inner lining of the garment. The seams are sealed for maximum waterproofness. This makes the wearing comfort optimal, while the functional properties of the G-liner construction are preserved.
Detachable thermal liner
Air outlet on upper back
Zippers on chest
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
Polyester 600D
This fabric made of polyester yarn makes a perfect, form-fitting medium for areas at lower risk of impact, keeping riders comfortable.
Polyester ripstop
Laminated reflection on back
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.
Laminated reflection at chest
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Laminated reflection at lower arms
Retroreflective, fluorescent lamination at the lower arms to aid visibility and improve safety in low-light situation.
Outershell
 |
Machine wash 30°C, mild cycle |
 |
Do not bleach |
 |
Do not tumble dry |
 |
Do not iron |
 |
Do not dry clean |
| Do not use softener |
| Fasten closures before use / cleaning / impregnation |
| Refer to the user manual |
| Remove protectors before cleaning |
| Wash inside out |
Removable thermal liner
|
Machine wash 30°C, mild cycle |
|
Do not bleach |
|
Do not tumble dry |
|
Do not iron |
|
Do not dry clean |
| Do not use softener |
| Dry naturally / completely before storing |
| Use mild detergent |
Live your passion. We’re here to make that happen regardless of what you ride. Follow us and get inspired by REV’IT! riders all around the world.
